Emotive Standard

Welded pocket doorframe without mounting frame for single-leaf sliding doors when no doorframe is used, but the passage around the door is lined with a 17 mm decorative aluminium frame. This frame is a design element and protects the passage.

About the product

A casing that allows replacement of a traditional mounting panel with a designer aluminium frame 17 mm wide, which is considered a decorative element that also protects the edge of the door passage. Pocket doorframe without mounting panel for single-leaf sliding doors. The Emotive Standard casing can be used in all makes of crossbars. The clean, modern lines of these pocket doorframes, without mounting panel, are an extension of the Emotive concealed doorframe line for revolving doors. Custom dimensions available to heights of 2700 mm. The Emotive Standard casing is for wooden, all-glass, Master, Sting or Idea doors. Entire casing made of quality galvanized sheet metal and aluminium profile. For a masonry crossbar, it is necessary to equip the construction opening with a lintel — the pocket doorframe cannot bear a load.

  • intended for a crossbar thickness of 125 mm or 150 mm
  • use for drywall and masonry crossbar
  • optional custom dimensions to passage height of 2700 mm
  • maximum weight of each door leaf 90 kg
  • use for drywall and masonry crossbar
  • high-quality, very quiet travelling mechanism in a special aluminium rail
  • removable rail
  • adjustable front and rear stop 
  • guide pin with precise definition at the centre of the casing
  • a switch can be placed on the casing pocket
  • 10-year warranty

For extra charge:

  • paint according to swatch books RAL K7, NCS and CREATIVE METALLIC
  • for suspension of the door leaf, an assembly kit for wooden or glass doors must be ordered 
  • optional single-side or double-side silent stop

Technical information

Standard width of passage600–1200 mm (optional custom passage widths when standard pocket width is observed)
Standard height of passage1970 mm and 2100 mm
Custom passage height1975 - 2700 mm
Minimal thickness of finished crossbar125 and 150 mm
Maximum weight of each door leaf90 kg
External thickness of casing100 mm
Maximum thickness of door leaf for outer casing dimension 100 mm40 mm


  • galvanized sheet metal
  • aluminium profiles
  • aluminium rail


Painted according to swatch book at extra charge

  • RAL K7
  • NCS

Similar products

Norma Standard

Profikit Standard

Aktive Standard

Latente Standard